| View previous topic :: View next topic |
| Author |
Message |
Gigitaly
Joined: 20 Aug 2009
Posts: 2
|
 Posted: Thu Aug 20, 2009 12:54 pm Post subject: Connecting B-283 with a Solid State amp |
 |
|
Hi, I have just received my new B-283 and before connecting it I want to be sure not to make mistakes.
Since I want to connect it to my cello amplifier which has an "insert" plug that is obviously a mono channell, which of the B-283 plugs should I connect it to: R or L? Any problem if only R (or L) is connected? since I am using it in a mono environment?
Maybe a little quick user guide in the box with simple cabling schemes and usage instructions was not a bad idea.
Thanks in advance for the answer.
Gigi |
|
| Back to top |
|
 |
igrant
Site Admin
Joined: 04 Jun 2007
Posts: 500
|
| Posted: Thu Aug 20, 2009 2:11 pm Post subject: |
|
|
Doesn't matter which channel you plug it in, but since you have a spare channel, you can also run it in series. from amp into B-283 left channel in. left channel out into right channel in, right channel out back into amp. Gives kind of a tube harmonic overdrive. Guitar players of course live there, will be very interesting to see what you think with Cello.
Maybe I should do a thread on how people are hooking them up 
Cheers,
Ian
_________________
www.grantfidelity.com
Come see us at FSI 2009, RM 909
Sign up for the GF Newsletter
Coupon Codes !! |
|
| Back to top |
|
|
|
Search
Register
Profile
Log in to check your private messages
Log in
